KZG Shafts

KZG offers shafts designed for different skill levels and for different performance results.

Visit KZG.com for more!


  • Repeatable consistency

  • Superior performance

  • Ultra-high modulus graphite

  • Stepless or fluted steel shafts

Accra Shafts

Worldwide leader in high performance golf shafts.

Visit Accragolf.com


Concept Series

ACCRA has always featured super high modulus composite materials, the Concept Series takes this to a new level with a greater concentration of composite versus resin content than ever before and more super high modulus graphite than ever before. This is incorporated with a weave section that runs the entire length of the shaft for the ultimate in stability.


iWood & iHybrid

At the butt, ACCRA has added a carbon weave material, which not only adds strength to the butt section of the shaft but also moves the CG (center of gravity) slightly more towards the butt section of the shaft. From a swing weight perspective, this counter balancing effectively makes the iSeries wood shaft an optimal choice for the new heavier driver heads. It also promotes an easier release and a draw bias.


SRT (for Juniors)

The wood shafts are available using super light weight high modulus materials and a .580 butt diameter for ease in gripping for those with smaller hands. The wood shafts are available in Fx SRT 41 (Softest flex), Fx SRT 42 (Mid flex), Fx SRT 43 (strongest flex).


FX 2.0 Series

To create the Fx series of shafts, ACCRA engineers used only the highest quality of materials to ensure quality, performance and feel. Each model of the Fx Series was independently engineered using ACCRA’s exclusive DyMatch technology offering golfers the ability to perfectly match their woods and hybrids dynamically.


Iron iSeries

ACCRA introduces the first constant weight series of iron shafts specifically designed to enable the world’s best professional clubfitters the ability to dial in a weight and flex to perfectly fit all levels of golfers.



You will notice a slightly smoother mid section and lower balance point to promote “feel” combined with a lower torque than previous Tour Z series models to maintain the low spin that Tour Z shafts are renowned for.


Tour Z Xtreme

The original Tour Z shafts revolutionized the shaft industry with it’s low launch/low spin “Tour” characteristics combined with ACCRA’s renowned “feel”. The ACCRA Tour Zx400 (Xtreme) series of shafts utilizes all of the technology of its predecessor while incorporating innovative manufacturing techniques and tangible material changes to enhance performance.


FX Putters

Introducing the ACCRA FX Putter.. An entirely new category for fitting a golfer’s set of clubs. Analysis of design, loft, and lie are all taken into account, yet few take the same serious consideration of matching a shaft to the unique swing characteristics and feel.



Where this shaft really shines is as a mid/high launching shaft in M4 and M5 flexes for the accomplished golfer. This is a spin killing machine that features 2.0 torque combined with the explosive tip section. New high modulus composite materials  enable ACCRA to maintain “feel” while introducing extremely low torque

True Temper Shafts

Trusted by more professional golfers than all other companies combined.

Artisan Golf is a Performance Fitting Center for True Temper.

Visit www.truetemper.com

Micro Taper

Micro Taper 95's step design and proprietary multi-wall technology improve feel and durability while also creating a more responsive tip section in the steel shaft that increases initial launch and maximizes peak trajectory. Micro Taper 95 is the perfect irons shaft for all smooth tempo players seeking increased distance.

TT Lite

The clubmaker's favorite! The mid-flex, longer length design of the TT Lite XL golf shaft is a great choice for any bore-through wood or iron. Irons shafts and clubs can be built substantially longer than "standard length" without requiring a butt extension. Custom fitting has never been easier.

Dynamic Gold Spinner Wedge

The DG Spinner is a one-of-a-kind wedge shaft designed to increase ball spin during those all important wedge and approach shots. Powered by a specially engineered section just beneath the grip, Spinner technology can increase your ball’s spin rate by as much as 700+ RPM.

Dynamic Gold Pro

With Progressive Technology, everything about DG Pro is progressive: the flex profile, step pattern, weight profile and internal material distribution. This allows True Temper to tailor the specific playing characteristic of the long, short and mid irons for optimum feel, spin control and trajectory, and ultimately, confidence-inspiring performance for this progressive steel shaft.

Dynamic Gold

The Dynamic Gold Family is the Gold Standard by which all other irons shafts are measured. Dynamic Gold uses Variable Wall Technology and a tour-proven step pattern to provide exceptional performance for serious golfers. This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

XP Series

The XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance, with many players seeing double-digit yardage gains with XP irons shafts.

Dynamic Gold X7

Dynamic Gold X7 golf shafts are the newest addition to the Dynamic Gold family. Based on the tour-proven design of Dynamic Gold, the new X7 shaft is extremely low-launching and low-spinning. Dynamic Gold X7 is the irons shaft of choice for today’s stronger, faster swingers who are seeking a low ball flight.

Dynamic Gold AMT

Dynamic Gold AMT Tour Issue irons shafts have the same performance DNA as Dynamic Gold and are designed to get progressively heavier as golfers move from their long iron to short iron. Lighter long irons produce increased speed and higher initial launch, which makes them easier to swing and deliver a softer landing.

Project X

Project X irons shafts deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

Project X LZ

Project X LZ steel features proprietary Loading Zone Technology which produces maximum shaft load during the downswing for 7% greater energy transfer to the ball at impact for more distance. 

Loading Zone Technology is achieved through variable wall technology in the shaft's butt and tip sections and a reduced stiffness in the midsection. Golfers can not only feel the technology, but see it as well in the rapid, tapered steps out of the grip through the midsection of Project X LZ.

Aerotech Shafts

Leading the industry in composite shaft innovation for more than 15 years, Aerotech Golf delivers cutting edge technology and unparalleled performance.

Visit www.aerotechgolfshafts.com

Steel Fiber

  • High modulus graphite core

  • Over 59 miles of steel fiber in each shaft

  • Each steel fiber has a diameter of 8 microns

KBS Shafts

The new KBS steel shafts feature advanced Moment of Inertia (MOI) technology and incorporate a high-quality precision manufacturing processes, such as: Exclusive 'Oil-Quench' tempering that produces shafts that are arrow-straight from clubhead to grip; and matching shaft weight and frequency to the strictest tolerances to ensure peak playing performance and guaranteed repeatability.

Visit www.kbsgolfshafts.com

KBS Steel Shafts

  • Wedge, iron or hybrid clubs

  • Stepped or stepless

  • Unique design that delivers greater performance and energy transfer

TGI Tour Graphite Iron

  • Designed for players looking for maximum steel like play-ability

  • Developed from optimized weight and stiffness.

Nippon Shafts

Some of the technology behind Nippon Shafts is far above the rest of the shaft market. A recent breakthrough in shaft design led to the discovery of Deflection Modular Control (DMC). DMC helps locate the shaft weight towards the grip of the shaft, resulting in full, easy swings. One of the best aspects of the DMC design though, is that it's effect is not lost on the larger heads; you will instantly notice a difference from your very first swing of the club.

Visit www.nippon-golf-shafts.com

Nippon Shafts

  • Graphite or steel

  • irons, woods and driver specific shafts

Project X Shafts

When you play a Hand Crafted Project X shaft, you can be sure it has been crafted with the utmost care. Learn more about how these shafts are hand made in our San Diego facility.

Visit www.pxshaft.com/products

Rifle Shafts

  • Frequency matched with consistent flex

  • parallel or tapered tip